Training Courses

Reassessment for Group 1 commercial catering appliances qualification renewal.

Reassessment for engineers renewing their Commercial Catering Appliances changeover qualification.

Initial Assessment covering Group 1 commercial catering appliances including ranges, ovens, and boiling tables.

CCN1 - Core Domestic Gas Safety

Essential core domestic gas safety course covering installation, commissioning, and servicing of domestic gas appliances. Required for all domestic gas engineers.

CENWAT - Central Heating Boilers

Installation, commissioning, and servicing of wet central heating boilers and system components.

CKR1 - Cookers

Installation and servicing of domestic gas cookers, including built-in and freestanding models.

CCCN1 - Commercial Core Gas Safety

Core commercial gas safety covering large commercial installations and industrial gas systems.

CCLNG1 - Commercial Catering (Natural Gas)

Installation and servicing of commercial catering equipment using natural gas.

COCN1 - Oil Core Safety

Core domestic oil safety for installation and servicing of oil-fired heating appliances.

HTR1 - Domestic Heat Pump Installation

Installation, commissioning, and maintenance of domestic air source and ground source heat pumps.

MET1 - Meters

Installation, commissioning, and exchange of gas meters up to U16.

PD1 - Pipework (up to 35mm)

Installation of gas pipework up to 35mm diameter in domestic and light commercial properties.

TPCP1 - Tightness Testing & Purging

Industrial tightness testing and purging procedures for large commercial and industrial installations.

LPCO1 - LPG Core Domestic

Core LPG safety for domestic installations including permanent and leisure applications.

ELEC1 - Electrical Isolation for Gas Engineers

New ACS requirement: Safe electrical isolation procedures for gas engineers working with electrical controls.

LAU1 - Unvented Hot Water Systems

Installation and servicing of unvented hot water storage systems.

SFE1 - Solid Fuel Appliances

Installation and servicing of solid fuel burning appliances including wood burners and stoves.

Initial Assessment for engineers transitioning from domestic to commercial catering gas work. Covers core safety principles and commercial catering equipment operation.

Reassessment for engineers who need to renew their Changeover Core Domestic to Commercial Catering qualification.

Initial Assessment for transitioning to commercial catering appliance work. Focuses on appliance-specific safety and installation procedures.

Initial Assessment covering Group 5 commercial catering appliances including fryers, griddles, and bratt pans.

Reassessment for Group 5 commercial catering appliances qualification renewal.

Initial Assessment combining Group 1 (ranges, ovens) and Group 3 (combination ovens) commercial catering appliances.

Reassessment for Groups 1 & 3 commercial catering appliances qualification renewal.

Initial Assessment covering comprehensive commercial catering appliances across Groups 1, 3, and 5 for maximum flexibility.

Reassessment for the comprehensive Groups 1, 3 & 5 commercial catering qualification.

Initial Assessment for engineers transitioning from domestic to commercial gas safety certification. Covers core commercial gas safety principles and regulations.

Reassessment for engineers renewing their commercial gas safety changeover qualification.

Comprehensive foundational training for commercial gas work. Essential preparation for commercial gas certification.

Focused training on commercial heating systems including installation, maintenance, and safety procedures.

Initial Assessment for the primary commercial natural gas qualification. Core certification for commercial gas engineers.

Reassessment for engineers renewing their Core Commercial Natural Gas qualification.

Assessment covering the use and interpretation of flue gas analysers for commercial gas appliances.

Initial Assessment for installation and servicing of commercial overhead radiant plaque and luminous tube heating systems.

Reassessment for overhead radiant heating systems qualification.

Initial Assessment for installation and servicing of commercial indirect fired warm air heating systems.

Reassessment for indirect fired warm air heaters qualification.

Initial Assessment for installation and servicing of commercial direct fired warm air heating systems.

Reassessment for direct fired warm air heaters qualification.

Comprehensive bundle combining Core Commercial Gas Safety with installation qualifications for maximum flexibility.

Assessment for installation, servicing, and commissioning of commercial gas laundry appliances. Covers safe installation procedures for commercial laundry equipment.

Specialist assessment covering detection, measurement, and safety procedures for carbon monoxide and carbon dioxide in domestic environments.

Assessment for safe installation of gas appliances in cavity wall situations, including flue and ventilation requirements.

Initial Assessment for engineers transitioning from commercial to domestic gas certification. Covers domestic gas safety principles.

Reassessment for engineers renewing their commercial to domestic gas changeover qualification.

Reassessment for engineers renewing their Core Domestic Gas Safety (CCN1) qualification.

Comprehensive training on domestic gas appliances including installation, servicing, and safety procedures.

Reassessment for the domestic gas cookers qualification.

Initial Assessment for installation and servicing of domestic gas ducted air heating systems.

Reassessment for domestic gas ducted air heaters qualification.

Reassessment for domestic central heating boilers and water heaters qualification.

Initial Assessment for installation and servicing of domestic gas water heaters including instantaneous and storage models.

Reassessment for domestic gas water heaters qualification.

Assessment covering installation, removal, and safety procedures for domestic gas meters.

Reassessment for domestic gas meters qualification.

Initial Assessment for installation and servicing of domestic gas fires and wall-mounted heaters.

Reassessment for domestic gas fires and wall heaters qualification.

Advanced assessment for gas tightness testing and purging procedures in domestic installations.

Reassessment for tightness testing and purging qualification.

Assessment for installation and maintenance of commercial gas meters including diaphragm, rotary, and turbine types. Essential for commercial meter engineers.

Assessment covering commercial low pressure gas meter installation and servicing for diaphragm and rotary meter types.

Initial Assessment for engineers working in emergency gas service roles. Covers emergency response procedures and gas safety protocols.

Reassessment for Core Emergency Service Provider qualification renewal.

Assessment for installation and maintenance of domestic medium pressure gas regulators and control systems.

Initial Assessment for domestic gas meter installation. Covers installation procedures, safety requirements, and commissioning.

Reassessment for domestic gas meter installation qualification.

Initial Assessment covering core competencies specific to natural gas meter installation engineers.

Reassessment for meter installer core competencies qualification.

MCS (Microgeneration Certification Scheme) certified training for heat pump systems. Covers installation, commissioning, and maintenance of air source and ground source heat pump systems. Essential qualification for renewable heating installations.

Comprehensive assessment for pipework installations between 0.035m³ to 1m³. Covers assessment procedures, testing regimes, safety considerations, and certification protocols for industrial gas installations.

Initial Assessment covering installations exceeding 1m³. Includes installation assessment, safety protocols, and actions required prior to testing for large industrial gas systems.

Comprehensive training program preparing participants to safely perform strength testing, tightness testing, and purging procedures for industrial gas installations. Essential preparation for TPCP assessments.

Initial Assessment for limited scope meter installation work. A restricted qualification that qualifies you to carry out specific meter installation tasks under supervised conditions.

Assessment for limited scope commercial gas meter instrumentation work. Covers specific tasks related to commercial meter installation and instrumentation.

Limited scope qualification for core commercial natural gas work. Restricted qualification for specific commercial gas tasks under supervision.

Initial Assessment for limited scope first fix commercial pipework installation. Qualifies you for specific first fix pipework tasks in commercial settings.

Limited scope qualification for first fix installation of commercial gas appliances. Covers specific installation tasks for commercial appliance work.

Limited scope qualification for domestic gas meter installation. Allows you to carry out specific domestic meter installation tasks.

Comprehensive training for limited scope meter installation work. Prepares candidates for limited scope meter installer assessments.

Training program for limited scope commercial pipework work. Prepares candidates for limited scope pipework installation assessments.

Initial Assessment for installation and servicing of gas fires in caravans. Covers LPG safety requirements, installation procedures, and caravan-specific gas regulations.

Reassessment for caravan gas fires qualification renewal.

Initial Assessment covering conversion techniques for boat gas installations from natural gas to LPG. Includes marine safety requirements and boat-specific installation standards.

Reassessment for natural gas to LPG conversion on boats qualification.

Comprehensive assessment covering various leisure and miscellaneous LPG appliances in domestic settings. Includes BBQs, patio heaters, and other outdoor LPG equipment.

Technical training and assessment for low-pressure LPG pipework electro fusion jointing. Covers modern jointing techniques for polyethylene pipe systems.

Reassessment for LPG conversion qualification specific to commercial mobile catering vehicles.

Comprehensive initial training for LPG gas work. Prepares candidates for LPG conversion and installation assessments. Essential foundation for LPG qualifications.

Refresher training for LPG qualification reassessments. Updates knowledge on latest LPG regulations and techniques.

Training and assessment for LPG refrigerator systems. Covers installation, servicing, and troubleshooting of LPG-powered refrigeration units commonly used in caravans and leisure vehicles.

Initial Assessment for converting natural gas installations to LPG in permanent dwellings, residential park homes, and leisure vehicles. Comprehensive qualification covering multiple property types.

Reassessment for natural gas to LPG conversion qualification for dwellings, park homes, and leisure vehicles.

Comprehensive training program for new entrants to the domestic gas industry. Provides foundational knowledge and practical skills for aspiring gas engineers. Complete preparation for Gas Safe registration.

Foundation course for gas meter installation and maintenance. Essential training for engineers looking to specialize in gas meter work. Covers meter types, installation procedures, and safety protocols.

Comprehensive training program for new entrants to commercial catering gas work. Prepares candidates for work with commercial catering appliances and systems.

Comprehensive training program for new entrants to commercial heating gas work. Provides essential knowledge and skills for commercial heating installations and maintenance.

OFTEC 10-600a qualification for oil-fired appliance installation and maintenance. Covers modern oil heating systems, burner technology, and installation standards.

OFTEC 10-101 qualification for oil storage and supply systems. Covers oil tank installation, pipework, and safety regulations for oil fuel systems.

Comprehensive OFTEC training and assessment package. Combines initial training with assessment for multiple OFTEC qualifications. Complete preparation for oil heating work.

OFTEC reassessment package with refresher training. Updates knowledge and renews multiple OFTEC qualifications in one comprehensive course.

OFTEC reassessment-only package for experienced engineers. Renews multiple OFTEC qualifications without additional training. For qualification renewal only.

One-day training on legionella risk assessment and water systems disinfection. Covers identification of risks, control measures, and disinfection procedures for water systems in buildings.

One-day course covering Part L Building Regulations for energy efficiency. Essential for engineers installing heating systems and understanding compliance requirements.

One-day safe isolation training course. Covers procedures for safely isolating gas installations and equipment. Essential safety training for gas engineers.

One-day training and assessment for unvented hot water systems. Covers installation, commissioning, and maintenance of unvented cylinders and systems.

One-day training and assessment on water regulations compliance. Covers Water Supply (Water Fittings) Regulations and backflow prevention.

Initial Assessment for first fix commercial pipework installation. Covers commercial pipework sizing, installation procedures, and pressure testing.

Reassessment for first fix commercial pipework qualification renewal.

Initial Assessment for non-domestic gas booster systems. Covers installation, commissioning, and maintenance of commercial gas booster equipment.

Training for smart gas meter installation and commissioning. Covers the latest smart metering technology, installation procedures, and data communications.

Training for smart electricity meter installation. Covers smart meter installation procedures, safety requirements, and commissioning for electrical metering.

Comprehensive training on solid fuel heating systems. Covers wet and dry systems, installation procedures, chimney requirements, and safety regulations for solid fuel appliances.