Training Courses

CCCN1 - Commercial Core Gas Safety

Core commercial gas safety covering large commercial installations and industrial gas systems.

CCLNG1 - Commercial Catering (Natural Gas)

Installation and servicing of commercial catering equipment using natural gas.

COCN1 - Oil Core Safety

Core domestic oil safety for installation and servicing of oil-fired heating appliances.

HTR1 - Domestic Heat Pump Installation

Installation, commissioning, and maintenance of domestic air source and ground source heat pumps.

MET1 - Meters

Installation, commissioning, and exchange of gas meters up to U16.

PD1 - Pipework (up to 35mm)

Installation of gas pipework up to 35mm diameter in domestic and light commercial properties.

CCN1 - Core Domestic Gas Safety

Essential core domestic gas safety course covering installation, commissioning, and servicing of domestic gas appliances. Required for all domestic gas engineers.

CENWAT - Central Heating Boilers

Installation, commissioning, and servicing of wet central heating boilers and system components.

CKR1 - Cookers

Installation and servicing of domestic gas cookers, including built-in and freestanding models.

TPCP1 - Tightness Testing & Purging

Industrial tightness testing and purging procedures for large commercial and industrial installations.

LPCO1 - LPG Core Domestic

Core LPG safety for domestic installations including permanent and leisure applications.

ELEC1 - Electrical Isolation for Gas Engineers

New ACS requirement: Safe electrical isolation procedures for gas engineers working with electrical controls.

LAU1 - Unvented Hot Water Systems

Installation and servicing of unvented hot water storage systems.

SFE1 - Solid Fuel Appliances

Installation and servicing of solid fuel burning appliances including wood burners and stoves.

Initial Assessment for engineers transitioning from domestic to commercial catering gas work. Covers core safety principles and commercial catering equipment operation.

Reassessment for engineers who need to renew their Changeover Core Domestic to Commercial Catering qualification.

Initial Assessment for transitioning to commercial catering appliance work. Focuses on appliance-specific safety and installation procedures.

Reassessment for engineers renewing their Commercial Catering Appliances changeover qualification.

Initial Assessment covering Group 1 commercial catering appliances including ranges, ovens, and boiling tables.

Reassessment for Group 1 commercial catering appliances qualification renewal.

Initial Assessment covering Group 5 commercial catering appliances including fryers, griddles, and bratt pans.

Reassessment for Group 5 commercial catering appliances qualification renewal.

Initial Assessment combining Group 1 (ranges, ovens) and Group 3 (combination ovens) commercial catering appliances.

Reassessment for Groups 1 & 3 commercial catering appliances qualification renewal.

Initial Assessment covering comprehensive commercial catering appliances across Groups 1, 3, and 5 for maximum flexibility.

Reassessment for the comprehensive Groups 1, 3 & 5 commercial catering qualification.

Initial Assessment for engineers transitioning from domestic to commercial gas safety certification. Covers core commercial gas safety principles and regulations.

Reassessment for engineers renewing their commercial gas safety changeover qualification.

Comprehensive foundational training for commercial gas work. Essential preparation for commercial gas certification.

Focused training on commercial heating systems including installation, maintenance, and safety procedures.

Initial Assessment for the primary commercial natural gas qualification. Core certification for commercial gas engineers.

Reassessment for engineers renewing their Core Commercial Natural Gas qualification.

Assessment covering the use and interpretation of flue gas analysers for commercial gas appliances.

Initial Assessment for installation and servicing of commercial overhead radiant plaque and luminous tube heating systems.

Reassessment for overhead radiant heating systems qualification.

Initial Assessment for installation and servicing of commercial indirect fired warm air heating systems.

Reassessment for indirect fired warm air heaters qualification.

Initial Assessment for installation and servicing of commercial direct fired warm air heating systems.

Reassessment for direct fired warm air heaters qualification.

Comprehensive bundle combining Core Commercial Gas Safety with installation qualifications for maximum flexibility.

Assessment for installation, servicing, and commissioning of commercial gas laundry appliances. Covers safe installation procedures for commercial laundry equipment.

Specialist assessment covering detection, measurement, and safety procedures for carbon monoxide and carbon dioxide in domestic environments.

Assessment for safe installation of gas appliances in cavity wall situations, including flue and ventilation requirements.

Initial Assessment for engineers transitioning from commercial to domestic gas certification. Covers domestic gas safety principles.

Reassessment for engineers renewing their commercial to domestic gas changeover qualification.

Reassessment for engineers renewing their Core Domestic Gas Safety (CCN1) qualification.

Comprehensive training on domestic gas appliances including installation, servicing, and safety procedures.

Reassessment for the domestic gas cookers qualification.

Initial Assessment for installation and servicing of domestic gas ducted air heating systems.

Reassessment for domestic gas ducted air heaters qualification.

Reassessment for domestic central heating boilers and water heaters qualification.

Initial Assessment for installation and servicing of domestic gas water heaters including instantaneous and storage models.

Reassessment for domestic gas water heaters qualification.

Assessment covering installation, removal, and safety procedures for domestic gas meters.

Reassessment for domestic gas meters qualification.

Initial Assessment for installation and servicing of domestic gas fires and wall-mounted heaters.

Reassessment for domestic gas fires and wall heaters qualification.

Advanced assessment for gas tightness testing and purging procedures in domestic installations.

Reassessment for tightness testing and purging qualification.

Assessment for installation and maintenance of commercial gas meters including diaphragm, rotary, and turbine types. Essential for commercial meter engineers.

Assessment covering commercial low pressure gas meter installation and servicing for diaphragm and rotary meter types.

Initial Assessment for engineers working in emergency gas service roles. Covers emergency response procedures and gas safety protocols.

Reassessment for Core Emergency Service Provider qualification renewal.

Assessment for installation and maintenance of domestic medium pressure gas regulators and control systems.

Initial Assessment for domestic gas meter installation. Covers installation procedures, safety requirements, and commissioning.

Reassessment for domestic gas meter installation qualification.

Initial Assessment covering core competencies specific to natural gas meter installation engineers.

Reassessment for meter installer core competencies qualification.

MCS (Microgeneration Certification Scheme) certified training for heat pump systems. Covers installation, commissioning, and maintenance of air source and ground source heat pump systems. Essential qualification for renewable heating installations.